VIBRATORY STRAIGHT LINE DRIVERS FOR VIBRATORY TRACKS ** TRACKING PARTS FROM AUTOMATIC VIBRATORY PARTS FEEDER BOWLS AND MECHANICAL PART HANDLING SYSTEMS
Straight Line Drive SL-1004 | Straight Line Drive SL-2011 | Straight Line Drive SL-3011 | Straight Line Drive SL-401104
VIBRATORY STRAIGHT LINE DRIVE - SL - 1004
Application
Do you have an application that you would like for us to look at?
Simply Contact Us and our experienced engineers will work with you to create the ideal automatic vibratory feeder bowl system which may include options of, vibratory hopper feeders, centrifugal feeders, vibratory drive units, vibratory tracks, parts sorters and part placements systems to solve your parts feeding pr oblem.
Vibratory Straight Line Drive Units, manufactured by Vibromatic are designed to move parts in a straight line motion from Vibratory Parts Feeder Bowls to Dead Nests, Escapement Devices or Placement Mechanisms. Like all Vibromatic equipment we have incorporated adjustability with a jack screw arrangement. This allows for ease of alignment between the Vibratory Straight Line Track and its mating Vibratory Parts Feeder, Dead Nest, Escapement Device or Placement Mechanism. The SL-1004 Drive Unit is capable of feed rates up to and sometimes beyond 180 inches per minute. This particular unit is capable of driving a normally tooled Vibratory Track 14 inches long with a maximum load of 7 pounds.
Standard operating voltage for one of these units is 115 V, 60Hz with a maximum power draw of .5 amp. Vibromatic can supply as an option an H001 variable speed control for this Vibratory Straight Line Drive unit. Shipping weight of this unit is approximately 8 pounds. Special tooling arrangements and special power requirements can be quoted upon request.
|
Item # |
No. REQ'D |
Description |
|
1 |
1 |
SL-1901 Top Plate |
|
2 |
11 |
1/4-20 x 1.00 SOC.HD.CAP Screw |
|
3 |
1 |
SL-9914 Armature Plate |
|
4 |
2 |
#10-21 x 50 SOC.HD.CAP Screw |
|
5 |
1 |
NC-0601 Coil |
|
6 |
1 |
SL-1902 Bottom Plate |
|
7 |
4 |
1/4-20 Hex Jam Nut |
|
8 |
4 |
1/4-20 Treaded Stock |
|
9 |
4 |
1/4-20 SOC.HD.CAP Screw |
|
10 |
5 |
.28 I.D. Flat Washer |
|
11 |
1 |
SL-9916 Coil MTG. Bracket |
|
12 |
8 |
SL-9918 Spring Spacer Block |
|
13 |
|
SL-9919 (.017) Spring |
|
14 |
4 |
SL-9917 Spring Clamp Block |
|
15 |
|
SL-9920 (.090) Spring |
> Click Here For Printable Drawing  pdf file 83kb
VIBRATORY STRAIGHT LINE DRIVE - SL - 2011
Vibratory Straight Line Track Application
Vibratory Straight Line Drive Units, by Vibromatic, are designed to move parts in a straight line motion from Vibratory Parts Feeder Bowls to Dead Nests, Escapement Devices or Placement Mechanisms.  The SL-2011 Vibratory Straight Line Driver has built in adjustability with a (3) point jack screw arrangement. This allows for ease of alignment between the Vibratory Straight Line Track and its mating Vibratory Parts Feeder, Dead Nest, Escapement Device or Placement Mechanism. All Vibromatic Vibratory Straight Line Drive Units are capable of feed rates up to and sometimes beyond 250 inches per minute. This particular unit is capable of driving a normally tooled track up to 24 inches long with a maximum load of 15 pounds.
Standard operating voltage for one of these units is 115V, 60Hz with a maximum power draw of 2.4 amp. Vibromatic can supply as an option an H001 variable speed control for this Vibratory Straight Line Drive Unit. Shipping weight of this unit is approximately 55 pounds. Special tooling arrangements and special power requirements can be quoted upon request.
|
Item # |
No. REQ'D |
Description |
|
1 |
1 |
SL-2901-W Body |
|
2 |
1 |
LS-2902-W Top Plate |
|
3 |
1 |
SL-2903-W Base |
|
4 |
1 |
SL-9901-W Coil Bracket |
|
5 |
1 |
L-120VB 120V Coil
L-240VB 240V Coil |
|
6 |
1 |
|
|
7 |
3 |
LS-1/2-7/8-14x3 SCR |
|
8 |
3 |
3/8-16x4 1/2 Hex. HD. SCR |
|
9 |
2 |
SL-9907-W (.07) Spring |
|
10 |
2 |
SL-9909-W (.09) Spring |
|
11 |
4 |
SL-9913-W (.13) Spring |
|
12 |
8 |
SL-9903-W CLP BLK |
|
13 |
24 |
SL-9904-W Spacer |
> Click Here For Printable Drawing pdf file 68kb
VIBRATORY STRAIGHT LINE DRIVE - SL - 3011
Vibratory Straight Line Track Application
 Vibratory Straight Line Drive Units, by Vibromatic are designed to move parts in a straight line motion from Vibratory Parts Feeder Bowls to Dead Nests, Escapement Devices or Placement Mechanisms. The SL-3011 Vibratory Straight Line Driver has built in adjustability with a (3) point jack screw arrangement. This allows for ease of alignment between the Vibratory Straight Line Track and its mating Vibratory Parts Feeder, Dead Nest, Escapement Device or Placement Mechanism. All Vibromatic Vibratory Straight Line Drive Units are capable of feed rates up to and sometimes beyon d 250 inches per minute. This particular unit is capable of driving a normally tooled vibratory track up to 24 inches long with a maximum load of 20 pounds.
Standard operating voltage for one of these units is 115V, 60Hz with a maximum power draw of 2.4 amp. Vibromatic can supply as an option, an "H" series variable speed control for this straight line drive unit. Shipping weight of this unit is approximately 55 pounds. Special tooling arrangements and special power requirements can be quoted upon request.
|
Item # |
No. REQ'D |
Description |
|
1 |
1 |
SL-3901-W Body |
|
2 |
1 |
LS-3902-W Top Plate |
|
3 |
1 |
SL-3903-W Base |
|
4 |
1 |
SL-9901-W Coil Bracket |
|
5 |
1 |
L-120VB 120V Coil
L-240VB 240V Coil |
|
6 |
1 |
|
|
7 |
3 |
LS-1/2-7/8-14x3 SCR |
|
8 |
3 |
3/8-16x4 1/2 Hex. HD. SCR |
|
9 |
2 |
SL-9907-W (.07) Spring |
|
10 |
2 |
SL-9909-W (.09) Spring |
|
11 |
4 |
SL-9913-W (.13) Spring |
|
12 |
8 |
SL-9903-W CLP BLK |
|
13 |
24 |
SL-9904-W Spacer |
> Click Here For Printable Drawing pdf file 57kb
 VIBATORY STRAIGHT LINE DRIVE - SL - 4011
Vibratory Straight Line Track Application
Vibratory Straight Line Drive Units, by Vibromatic are designed to move parts in a straight line motion from Vibratory Parts Feeder Bowls to Dead Nests, Escapement Devices or Placement Mechanisms. The SL-4011 Vibratory Straight Line Driver has built in adjustability with a (3) point jack screw arrangement. This allows for ease of alignment between the Vibratory Straight Line Track and its mating Vibratory Parts Feeder, Dead Nest, Escapement Device or Placement Mechanism.
All Vibromatic Vibratory Straight Line Drive Units are capable of feed rates up to and sometimes beyond 250 inches per minute. This particular unit is capable of driving a normally tooled track up to 48 inches long with a maximum load of 30 pounds.
Standard operating voltage for one of these units is 115V, 60Hz with a maximum power draw of 3.2 amp. Vibromatic can supply as an option, an "H" series variable speed control for this vibratory straight line drive unit. Shipping weight of this unit is approximately 130 pounds. Special tooling arrangements and special power requirements can be quoted upon request.
|
Item # |
No. REQ'D |
Description |
|
1 |
1 |
SL-3901-W Body |
|
2 |
1 |
LS-3902-W Top Plate |
|
3 |
1 |
SL-3903-W Base |
|
4 |
1 |
SL-9901-W Coil Bracket |
|
5 |
1 |
L-120VB 120V Coil
L-240VB 240V Coil |
|
6 |
1 |
|
|
7 |
3 |
LS-1/2-7/8-14x3 SCR |
|
8 |
3 |
3/8-16x4 1/2 Hex. HD. SCR |
|
9 |
2 |
SL-9907-W (.07) Spring |
|
10 |
2 |
SL-9909-W (.09) Spring |
|
11 |
4 |
SL-9913-W (.13) Spring |
|
12 |
8 |
SL-9903-W CLP BLK |
|
13 |
24 |
SL-9904-W Spacer |
|
14 |
2 |
SL-9905-W Spring |
> Click Here For Printable Drawing pdf file 70kb
Request a Quote...
Troubleshooting and other technical information | 